E-Track and Anchors Buying Guide
Boxer Tools
What E-Track Is and Where It Is Used
E-track is a steel rail with slots along its length. Fittings clip into the slots, so you can put a tie-down point wherever you need one. Straps, hooks, and rings attach to the fittings, and the fittings move when the load changes.
It holds motorcycles, furniture, tools, and equipment in place in trailers, truck beds, garages, and workshops, and works as wall storage. See the E-Track System collection.
Horizontal vs. Vertical Track and Which Lengths Boxer Sells
Horizontal track runs along a wall or floor for long loads and rows of tie-down points. Vertical track runs up a wall for hanging gear.
| Rail | Finish | Price | Notes |
|---|---|---|---|
| 1 ft, set of 4 | Black | $19.99 | 12 pre-drilled holes |
| 2 ft, set of 2 | Black, Silver | $35.99 | 12 pre-drilled holes |
| 5 ft horizontal | Black | $23.49 | Black powder-coated 12-gauge steel |
| 5 ft horizontal | Galvanized | $23.49 | 12-gauge galvanized steel; separate listing from the black 5 ft rail |
| 10 ft horizontal | Galvanized | $43.99 | 12-gauge galvanized steel; truck freight, call for a quote |
| 10 ft vertical | Black | $29.99 | Wall mounting in garages and workshops |
| 18 ft horizontal | Raw finish | $58.99 | One piece, 12-gauge steel, 2,000 lbs; local pickup only |
| 26 ft horizontal | Galvanized | $64.99 | One piece, 12-gauge galvanized steel, 2,000 lbs; local pickup only |
A single long rail means fewer joints than joining several short rails. The 1 ft and 5 ft rails ship by ground; the 18 ft and 26 ft rails are local pickup only from Boxer's Santa Fe Springs, California warehouse. Browse all rails in the E-Track Rails collection.
Finishes and What Is Actually Sold in Each Length
Galvanized steel resists rust and corrosion, suiting trailers and outdoor use. Black powder coating resists scratches and rust. Silver is a plain metal finish; raw finish is uncoated steel.
Only the finishes in the table above are sold in that length. The 5 ft black and galvanized rails are separate listings with different SKUs, not one listing with a finish choice. The 10 ft horizontal rail is galvanized only, and the 10 ft vertical rail is black only.
How to Mount E-Track
Mount the rail to a solid surface — a trailer wall or floor frame, a truck bed, or wall studs. It needs solid material behind every fastener; thin paneling alone will not hold.
Hold the rail in place, mark the pre-drilled holes, and fasten it at every hole so it sits flat with no gaps behind it, using fasteners suited to the surface. Installation hardware is not included with the 1 ft and 2 ft rails. Before loading it, pull on the rail by hand and confirm no fastener moves. Place rails where straps can run straight to the load, not at a sharp angle.
General guidance only — Boxer's listings state no screw sizes or torque values. If unsure the surface can carry the load, ask a qualified installer.
Fittings: O-Rings, D-Rings, Rope Tie-Offs, and Wheel Straps
Fittings clip into the rail slots and are what your strap or rope connects to, so pick the fitting for the job. All fit standard E-track. Browse them in the E-Track Fittings collection.
| Fitting | Breaking strength | Price |
|---|---|---|
| O-ring anchor, single-stud | 4,000 lbs | $4.99 |
| O-ring anchor, double-stud, 1-1/4" ring | 6,600 lbs (2,200 lbs working load limit) | $5.99 |
| O-ring anchor, double-stud, 2-1/4" ring | 6,600 lbs (2,200 lbs working load limit) | $7.99 |
| D-ring anchor | 4,000 lbs | $4.99 |
| Rope tie-off, 2" x 6' | 5,000 lbs (1,667 lbs working load limit) | $3.99 |
| Delta ring rope tie-off with swivel idler | 4,800 lbs (1,600 lbs working load limit) | $9.99 |
| Spring fitting clip | 5,000 lbs | $3.99 |
| Square J-hook anchor | — | $7.95 |
| Round U-hook anchor | — | $8.95 |
| Swivel idler anchors | — | $6.99 |
O-rings are round; double-stud versions clip into two slots and hold steadier, and the larger ring takes bigger hooks. D-rings are D-shaped and fold flat. Rope tie-offs are for rope instead of straps — the rope tie-off comes in Black or Yellow, and the delta ring version (11" long, 2" wide) is made to order, with a swivel idler that lets the ring turn to meet the pull. Spring fitting clips are the basic clip other straps build on, and J-hooks and U-hooks give a hook point for straps and rope.
Wheel straps hold a vehicle by its tires. The E-track wheel chock tie-down strap, 2" x 8' is a ratchet strap with a wheel chock, rated 4,400 lbs break strength, $10.99. The chock locks around a tire up to 35" in diameter; order one per tire. See the E-Track Wheel Straps collection.
Breaking strength is not the working load limit. Never exceed the lowest-rated part of the setup — rail, fitting, or strap.
Matching Straps to the Track
E-track straps have E-fittings that clip into the rail slots, and any 2" E-track strap fits any standard E-track rail. Pick by length, buckle type, and rating. Browse them in the E-Track Straps collection.
| Strap | Lengths and prices |
|---|---|
| Cam buckle, 2" wide | 12 ft $9.29; 16 ft $12.49; 20 ft $13.99 |
| Ratchet, 2" wide, 4,400 lbs load capacity | 12 ft $9.89; 16 ft $10.99; 20 ft $11.99 |
| Ratchet with triple E-fittings, 2" wide, 4,400 lbs | 16 ft $13.99; 20 ft $15.99 |
Cam buckles tighten by hand and suit lighter, frequent use. Ratchets pull tighter and suit heavier loads. Triple E-fitting straps give extra anchor points along the rail.
Boxer sells kits: the E-Track Rail Tie-Down Kit ($67.99) and 5 ft galvanized rail kits with 2" x 12' yellow straps ($79.99), 2" x 16' gray straps ($89.99), or 2" x 20' blue straps ($99.99). See the E-Track Kits collection.
FAQ
What is E-track? A steel rail with slots along its length. Fittings clip into the slots to create tie-down points wherever you need them.
Should I use horizontal or vertical E-track? Use horizontal track along a wall or floor for a row of tie-down points for cargo; use vertical track up a wall to hang gear. Boxer sells horizontal rails in 1, 2, 5, 10, 18, and 26 ft, and a vertical rail in 10 ft black.
What finishes does Boxer sell? Black, galvanized, silver, and raw finish — but not every finish in every length. The 1 ft rail is black only, the 2 ft rail is black or silver, the 5 ft rail is sold as separate black and galvanized listings, the 10 ft horizontal rail is galvanized only, the 10 ft vertical rail is black only, the 18 ft rail is raw only, and the 26 ft rail is galvanized only.
What is the difference between an O-ring and a D-ring fitting? Both clip into the track and give straps and hooks a place to attach. O-rings are round; D-rings are D-shaped and fold flat. Boxer's single-stud O-ring and D-ring anchors are both rated 4,000 lbs breaking strength, and the double-stud O-ring anchors are rated 6,600 lbs.
Do E-track straps fit any E-track rail? Yes. Any 2" E-track strap with E-fittings fits any standard E-track rail, including Boxer's rails. Match the strap length to the distance from the rail to the load.
Sources
Every spec in this guide was verified live from the Boxer Tools Shopify store on 2026-11-10 via GraphQL. Product handle and SKU are given for each source.
- 1 ft E-track, set of 4 — handle
boxer-1-foot-horizontal-coated-e-track, SKU 30131-BLK, $19.99; black finish, 12 pre-drilled holes, 2.5 mm thick, 86 mm wide, hardware not included (description). - 2 ft E-track, set of 2 — handle
heavy-duty-2-feet-e-track-set-of-2, SKUs 30134-2-BLACK / 30134-SILVER, $35.99; Black and Silver, 12 pre-drilled holes, 2.5 mm thick, 86 mm wide, hardware not included (description). - 5 ft black horizontal E-track — handle
5ft-black-horizontal-e-track, SKU 30135-2-BLK, $23.49; black powder-coated 12-gauge steel, 1 rail per order, can mount horizontal or vertical (description). - 5 ft galvanized horizontal E-track — handle
5-feet-horizontal-galvanized-e-track, SKU 30135, $23.49; 12-gauge galvanized steel, 1 rail per order (description). - 10 ft galvanized horizontal E-track — handle
horizontal-e-track, SKU 30130, $43.99; 12-gauge galvanized steel, truck freight, 1 ft and 5 ft rails ship ground (description). - 10 ft black vertical E-track — handle
10-feet-vertical-e-track, SKU 30150, $29.99; black finish, 10 ft, 1 piece per order (title and description). - 18 ft raw finish horizontal E-track — handle
18ft-raw-finish-e-track-2000-lb, SKU 30120, $58.99; 12-gauge steel, 2,000 lbs rating, local pickup only (title and description). - 26 ft galvanized horizontal E-track — handle
26ft-galvanized-e-track-the-ultimate-tie-down-solution, SKU 30130-26, $64.99; 12-gauge galvanized steel, 2,000 lbs rating, local pickup only (title and description). - E-track spring fitting clip — handle
logistic-e-track-fittings, SKU 10213-MH23, $3.99; 5,000 lbs breaking strength (title). - Single-stud O-ring anchor — handle
e-fitting-with-o-ring, SKU 10217-A10217R-VR21-O, $4.99; 4,000 lbs breaking strength (title and description). - Single-stud D-ring anchor — handle
d-ring-e-fitting, SKU 10219-VR22-A10217D, $4.99; 4,000 lbs breaking strength (title and description). - Double-stud O-ring anchor, 1-1/4" — handle
1-1-4-double-stud-e-track-o-ring-anchor, SKU A10218R, $5.99; 6,600 lbs breaking strength, 2,200 lbs working load limit, yellow chrome (title and description). - Double-stud O-ring anchor, 2-1/4" — handle
double-stud-e-fitting-with-o-ring, SKU A10218R-52, $7.99; 6,600 lbs breaking strength, 2,200 lbs working load limit, yellow zinc plated (title and description). - Rope tie-off, 2" x 6' — handle
cargo-rope-tie-off, SKUs 77240/ TO-6-BLACK (Black) and 77242/ TO-6-YELLOW (Yellow), $3.99; 5,000 lbs breaking strength, 1,667 lbs working load limit, 6 ft long, 2 in wide (title and description). - Delta ring rope tie-off with swivel idler — handle
delta-ring-rope-tie-off-e-track-swivel-idler, SKU TO-WH50, $9.99; 4,800 lbs breaking strength, 1,600 lbs working load limit, 11 in long, 2 in wide, yellow, made to order (title and description). - Square J-hook anchor — handle
e-track-square-j-hook-fitting, SKU 70225-MH25, $7.95 (title). - Round U-hook anchor — handle
e-track-curved-j-hook-fitting, SKU 70226-MH26, $8.95 (title). - Swivel idler anchors — handle
e-track-idler-swivel-tie-down-anchors, SKU WH50, $6.99 (title). - Cam buckle E-track straps, 2" — 12 ft handle
logisitic-strap-with-cam-buckle-and-e-fitting, SKU 66170-LS212CB, $9.29; 16 ft handle16-feet-logistic-strap-with-cam-buckle-and-e-fitting, SKU 66171-LS216CB, $12.49; 20 ft handle20-feet-logistic-strap-with-cam-buckle-and-e-fitting, SKU 66172-LS220CB, $13.99. - Ratchet E-track straps, 2", 4,400 lbs load capacity — 12 ft handle
logistic-strap-with-ratchet-and-e-fitting, SKU 66175-LS212RT, $9.89; 16 ft handle16-feet-logistic-strap-with-ratchet-and-e-fitting, SKU 66176-LS216RT, $10.99; 20 ft handle20-feet-logistic-strap-with-ratchet-and-e-fitting, SKU 66177-LS220RT, $11.99. - Triple E-fitting ratchet straps, 2", 4,400 lbs — 16 ft handle
2-x-16-ratchet-e-track-strap-triple-e-fittings, SKU LS216RT-3MH23, $13.99; 20 ft handle2-x-20-ratchet-e-track-strap-triple-e-fittings, SKU LS220RT-3MH23, $15.99. - Wheel chock tie-down strap, 2" x 8' — handle
e-track-wheel-chock-tie-down-strap-2-x-8, SKU LS210RT-RED LOGO, $10.99; 4,400 lbs break strength, chock fits tires up to 35" diameter (title and description). - E-track rail tie-down kits — handle
e-track-rail-tie-down-kit, SKU ETRK-RAIL-KIT, $67.99; 5 ft galvanized kit with 12 ft yellow straps handle5-e-track-rail-tie-down-kit, SKU 5ETRK-RAIL-KIT-YELL, $79.99; with 16 ft gray straps handlee-track-rail-tie-down-kit-5ft-2-x-16-gray-straps, SKU 5ETRK-RAIL-KIT-GRAY, $89.99; with 20 ft blue straps handlee-track-rail-tie-down-kit-5ft-2-x-20-blue-straps, SKU 5ETRK-RAIL-KIT-BLUE, $99.99. - Collections verified live —
e-tracks-system(E Tracks System),e-track-rails(E Track Rails),e-track-fittings(E Track Fittings),e-track-straps-tie-downs-1(E Track Straps),e-track-wheel-straps(E Track Wheel Straps),e-track-kits(E Track Kits).